Parts Suchiyu SCY 16101 16101PRO Upgrade Metal Kit

Description:

This kit can directly replace the original plastic parts, and all parts are equipped with mounting screws.

What should I pay attention to when installing the SCY 16101 pro rc car upgrade metal kit?

• Adjust the metal connecting rod to the same length as the original plastic connecting rod

• The front steering cup and rear cup need to be installed with bearings, the bearings are the same as the original bearings, parts number: 6046
• The bearings need to be completely installed in the grooves. If they are too tight, you can use tools to knock them in
• Note that some swing arms need to distinguish the arc, and the front steering cup needs to distinguish the left and right

Is the SCY 16101 pro upgrade metal kit easy to install?

1. It's very simple. Before installation, please do not disassemble the original car.
2. You need to compare with the original car first,
3. Assemble the front swing arm and steering cup,
4. Assemble the rear swing arm and rear cup,
5. Compare with the original car, and disassemble the car after confirmation, and assemble it to the car.

PS: If you find that the dog bone cannot be installed smoothly, or the swing arm cannot be installed smoothly, it means that your steering cup may be reversed.

The following car bottom is another car bottom in the SCY 1/16 series. It is only different from 16101 in front and rear bumpers and wheels, but everything else is the same.

For SCY 16101/SCY 16101 PRO 1/16 RC Car.